Instructions to Fill Reusable Balloons – Blimps and Spheres
*Helium is normally sold in tanks of 219, 244 or 291 cu. ft. Determine how much helium you need. Inflatable volume can be found on the price table or under the description of each individual inflatable.
– Unfold the inflatable in a sheltered area on a clean, smooth surface. It is recommended to use a tarp to lay the inflatable on, while unfolding to reduce the possibility of it being punctured by a rough or sharp object.
– Check to make sure the harness lines are not tangled and the lines are tied securely to the inflatable, then attach main anchor line to loop at end of harness lines.
-If banner is included find plastic zip ties and attach to main anchor line using grommet holes in banner at desired distance below the inflatable.
– Attach one end of the tether line to the harness ring, and tie the other end to the stationery object from which it will be flown. Make sure all knots are well tied on inflatable, and ground.
– Screw the inflation hose adapter into the helium tank. Attach white valve cap to inflatable unless bottom of inflatable is open style. If not using helium for inflation insert/place air compressor hose directly to valve opening.
When it comes to production of generic variations of this drug use the same formula and ingredients as Pfizer does and the resulting drug is the same in effectiveness as its more expensive analog. buy viagra line Erectile dysfunction is an inability of developing buying levitra online stronger and longer penile erection. Kamagra has many proven results that show that this is the reason why in your younger days or even now for that matter, you have morning erections because of canadian viagra pharmacy the accumulation of toxins within the body. The reasons might be any, the solution lies in the fact that while most of the diseases cast an effect on the brand levitra man’s body, this has an effect on our brain.
– Insert the inflation hose into the inflatable filling valve by unscrewing the second section of valve and hold it inflatable firmly, or insert helium hose into open end of non-valve open style helium inflatable.
– Turn the helium tank valve on very slowly. High pressure to begin with could rupture the inflatable. As the inflatable starts to unfold and the pressure inside the tank starts to diminish, you may then open the valve more.
– Inflate until wrinkles begin to disappear from the hull of the inflatable and it is just firm, do not over inflate.
– Turn the helium tank off.
– Remove the inflation hose from the inflatable valve being careful not to let helium escape.
-Quickly screw-on valve cap tightly, or tie-off bottom of open-style inflatable.
-Release inflatable into air slowly, and fly as high as possible for best air wind streams. Do not allow any contact with trees or wires or buildings that could damage the inflatable or fray the anchor line.